Jeep JL 392 2.5 Inch Ride Right+ Lift Kit 4DR For 18-Present Wrangler JL Clayton Offroad

Our 2018+ Jeep Wrangler Ride Right+ Suspension Lift Systems are designed both with function and value as top priorities. At last! The Jeep Wrangler 392 is finally here and for the most part, it's everything power-hungry Jeep fans have been craving for decades.

Equipped with a 470-hp V-8 engine, the 392 certainly delivers on power, but the 2 inch factory lift and suspension system as a whole leaves a little to be desired. Soft springs, non-adjustable components, and not quite enough lift to fit those 37 inch or larger tires means an immediate suspension upgrade is imminent.

Clayton Off Road is addressing all of these issues and more by making our entire lineup of JL Wrangler suspension systems available specifically for the 392. Keeping in mind the factory-equipped 2 inch lift, you can expect to gain about one additional inch of lift from our 2.5 inch system to fit up to 37 inch tires, and an additional 2 inches of lift from the 3.5 inch system to fit up to 39 inch tires.

Not only are you gaining the extra clearance required for larger tires and wheel travel, but the on-road driving benefits provided by our suspension systems are worth the upgrade alone. The Jeep Wrangler 392 is a dream come true for many; unleash the full potential of your investment with a suspension system designed by the Jeep suspension experts at Clayton Off Road.

Our Ride Right+ suspension systems may be our brand-new base-priced kits but make no mistake these are not your average entry-level lift kit systems. The Ride Right+ system addresses the most critical parts of your vehicle's suspension, allowing for proper suspension geometry to keep your vehicle driving smoothly and safely, with the added benefit of being able to run larger size wheels and tires at a more budget-friendly price point.

So, what's included and who is this kit designed for?

Clayton Off Roads' brand-new Ride Right+ Suspension System is for anyone looking to fit a larger set of wheels and tires, maintain ride quality with proper suspension geometry, and that primarily plans on keeping the vehicle on the pavement rather than on the trail.

Ride Right+, however, is designed to be fully upgradable to our complete Overland+ Suspension System should you wish to add on the remaining adjustable control arms and components in the future and turn your vehicle into the ultimate on-road and off-road machine!

Adjustable front and rear track bars are both included in the Ride Right+ kit since proper suspension geometry is even more critical for on-road driving than for off-road. Even just cruising down the highway puts a load of stress on your vehicle's suspension. Without properly positioned axles, you're practically begging for an uncomfortable driving experience. That's why even when shopping for a budget-friendly lift kit option there are certain components that just shouldn't be compromised.

When it comes to on-road driving performance, caster angle is one of the most crucial components to address as it directly affects your vehicle's steering and handling. For this reason, adjustable front upper control arms are also included in the Ride Right+ suspension system.

The distance from the center of the axle to the center of the upper control arms is greater than the center of the axle to the center of the lower control arms, which makes utilizing these front upper arms the most effective way to adjust your caster angle and address this critical piece of the suspension puzzle.

Adjustable sway bar links are also included since proper sway bar angles greatly affect your on-road ride and handling, which the factory rods would no longer be able to properly maintain with your vehicles newly added height.

Of course, brand-new coil springs front and rear are included in the kit as well, so you'll be ready for those larger wheels and tires!