- Catalog Home
- Exterior Accessories
- Exterior Lighting
- LED Light Bar
LED Light Bar
- Patented Broad Spot Optics
- 50000 Hr+ LED Lifespan
- 9-15 VDC
- Black Exposed Printed Circuit Board
- RIGID Branding Plates
- Harness Sold Seperately
- Universal Fit / Fits All Existing E-Series Grilles And Mounts
- Harness / Switch / Relay Included
- 3 Optic Zones - Scene / Driving / Spot
- Seamless Beam Transition
- Slow Speed / Moderate Speed / High Speed Beam Patterns
- 9-36 VDC
- Two Layers Of Adaptive Response
- Active Power Management™ System - Power Capacity Sensing
- Active View Technology™ - Internal GPS Module
- Use In Adapt Mode Or All On
- Limited Lifetime Warranty
- Alloy Housing and Heatsink
- Active View Technology - Includes GPS Module
- 8 Selectable Beam Patterns
- Integrated Optics - Spot / Flood And Driving Zones
- Selectable RGB-W Accent Lighting
- Includes Back Lit Molded Dash Controller
- Multiple Mounting Locations
- Unique Look And Experience
- Patented Technology
- Use In Adapt Mode Or All On
- Limited Lifetime Warranty
- Alloy Housing and Heatsink
- Unbreakable Polycarbonate Lens
- Power Output 30-250 Watts
- 6063 Extruded Aluminum Housing w/Die-Cast Ends
- Dust And Moisture Resistant
- Raw Lumens 2980-29900
- Incl. Wiring Harness w/Connector/Switch/Relay And In-Line Fuse
- Incl. Side Mount Brackets And hardware
- Limited Lifetime Warranty
- Available In Flood Or Combo Beam
- Power Output 30-250 Watts
- 6063 Extruded Aluminum Housing w/Die-Cast Ends
- Dust And Moisture Resistant
- Raw Lumens 2980-29900
- Incl. Wiring Harness w/Connector/Switch/Relay And In-Line Fuse
- Incl. Side Mount Brackets And hardware
- Limited Lifetime Warranty
- Available In Flood Or Combo Beam
- Kit Includes B-Force Double Row Led Light Bar
- Incl. Laser-Cut Mounting Brackets; Wiring Harness And Hardware
- Brackets Constructed With 12 Gauge Steel
- Brackets Bolt Beneath A-Pillar To Prevent Roof Leaks
- Foam Gaskets Included To Protect Vehicle Finish
- Upper Exposed Hardware Is Black Plated Stainless Steel
- Laser-Cut Westin Logo
- U.S. Patent No. D783192S
- Patent Face Plate For Vehicle Light Feature
- 10-Stage Variable Valving
- Does Not Interfere w/Washer Nozzle Or Spray Pattern
- 19200 Lumens
- 240 Watts
- 30 Degree Spot Beam
- Contains 30; 5 Watt High Intensity Cree Leds
- IP67 Waterproof Rating
- Durable Die Cast Aluminum Housing
- Moisture Breather Technology
- Reduces Moisture Build-up Behind The Lends
- Incl. Premium; Flat-wound Wiring Harness w/On/off Switch
- 3 Year Warranty
- 27 Pre-Programmed Modes
- Programmable Running And 3 Auxiliary Triggers
- Supports Running/Brake/Reverse And Turn Signal
- LED Colors: Red/White/Blue/Green And Amber
- Over 300000 Possible Configurations
- User Defined Programming And Usage
- Sleek Look - No Exterior Hardware
- 9-16VDC
- Pressure Equalizing Vent
- Operating Temperature -40F To 158F/ Integrated Thermal Management
- SAE J575 Compliant - Shock/Vibration
- IP68 Compliant - Dust/Water Ingress
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Contains 60;5 Watt High Intensity Cree Leds
- Contains 30; Cool White Daytime Running Light Leds
- 5 Degree Spot/90 Degree Flood Combo Pattern
- Black Panel Design
- IP67 Waterproof Rating
- Durable Die Cast Aluminum Housing
- Moisture Breather Technology
- Reduces Moisture Build-up Behind The Lens
- Incl. Wiring Harness w/Three-way Switch
- 3 Year Warranty
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Durable Die Cast Aluminum Housing
- Moisture Breather Technology
- Reduces Moisture Build-up Behind The Lens
- Noise Silencers Eliminate Hum; Whistle
- And Other Wind Noises Associated w/Mounted Led Light Bars
- Incl. Premium; Flat-wound Wiring Harness w/On/off Switch
- Lights Feature A 3-year Warranty
- Mounting Brackets Feature A Lifetime Replacement Warranty
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Contains 80; 5 Watt High Intensity Cree Leds
- Contains 40 Watt Cool White Daytime Running Light Leds
- 10 Degree Spot/60 Degree Flood Combo Pattern
- IP67 Waterproof Rating
- Moisture Breather Technology
- Reduces Moisture Build-up Behind The Lens
- Incl. Wiring Harness w/Three-way Switch
- Durable Die Cast Aluminum Housing
- Length: 43 in.; Depth: 3.45 in.; Height: 3 in.
- Bolt Diameter: 8mm
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- 14400-lumens
- 180W
- Contains 60; 3-watt Cree Leds
- Durable Die Cast Aluminum Housing
- 8-degree Spot/90-degree Flood Combo Pattern
- Chrome Panel Design
- IP67 Waterproof Rating
- Incl. Wiring Harness
- Incl. Noise Silencers To Help Eliminate Hum; Whistle
- And Other Wind Noise Associated w/Mounted Led Light Bars
- Available In 6/12/20/30/40 And 50 in. Lengths
- 3W LED Chips
- Dust And Moiture Resistant Lens
- Raw Lumens 2150 To 19200
- Limited Lifetime Warrenty
- Available In Combo or Spot Beam
- 50000 Plus Hour Lifespan
- 9-36 V DC
- Durable UV Resistant Powder Coat
- High-Grade Aluminum Alloy
- Integrated Thermal Management System
- Impact Resistant Polycarbonate Lens
- Over/Under Voltage Protection
- RFI/EMI Protection
- Reverse Polarity Protection
- RoHS Compliant
- IP68 Compliant - Dust/Water Ingress
- SAE J575 Compliant - Shock/Vibration
- 50000 Plus Hour Lifespan
- 9-36 V DC
- Durable UV Resistant Powder Coat
- High-Grade Aluminum Alloy
- Integrated Thermal Management System
- Impact Resistant Polycarbonate Lens
- Over/Under Voltage Protection
- RFI/EMI Protection
- Reverse Polarity Protection
- RoHS Compliant
- IP68 Compliant - Dust/Water Ingress
- SAE J575 Compliant - Shock/Vibration
- Dimensions 7.7 x 2.4 in.
- 3W LED Chips
- Die Cast Aluminum Housing
- Dust And Moisture Resistant Lens
- Raw Lumens 1320
- Set Of 2
- Incl. Mounting Hardware And Pigtail Connectors
- Limited Lifetime Warranty
- Available in Flood Beam
- U.S. Patented
- Textured Black Powder Coat Finish
- Solid 1-Piece Construction
- Removable Step Plate For Easy Cleaning
- Mount Kit Included
- Fits Tight To Rocker Panel For A Better Fit And Rugged Look
- Die Stamped Steel Step Areas For Maximum Traction
- Chiseled Style Complements HDX Bumpers
- PWM Thermal Management Regulation
- Aval In Flex Beam For A Combination Of Both Spot And Flood Beam
- Rock Light Mount Points
- Bolt On Installation; No Drill Required
- Integrated Recovery Shackle Mount Points
- Includes Bumper; Mounting Hardware And Install Instructions
- Designed To Work With Factory Or Westin Hitches
- Auxiliary Light Mount Points
- 2 Off-Road Jack Points
- 0.1875 in. Plate Steel Construction
- Easy Bolt-On Installation
- No Cutting or Drilling
- Each Light Contains 40; 3 Watt High Intensity Cree Leds
- 9600 Lumens
- 120 Watts [total]
- Contains 20; 3 Watt Amber Daytime Running Light Leds
- 10 Degree Spot/60 Degree Flood Combo Pattern
- IP67 Waterproof Rating
- Moisture Breather Technology
- Reduces Moisture Build-up Behind The Lens
- Incl. Wiring Harness w/Three-way Switch
- Incl. Base And End Mounts
- Easy Bolt-On Installation
- No Cutting or Drilling
- Each Light Contains 40; 3 Watt High Intensity Cree Leds
- 9600 Lumens
- 120 Watts [total]
- Contains 20; 3 Watt Amber Daytime Running Light Leds
- 10 Degree Spot/60 Degree Flood Combo Pattern
- IP67 Waterproof Rating
- Moisture Breather Technology
- Reduces Moisture Build-up Behind The Lens
- Incl. Wiring Harness w/Three-way Switch
- Incl. Base And End Mounts
- Easy Installation
- Installs Discretely Behind The Grille
- Looks Like Factory Equipment
- Durable Black Carbon Powdercoating
- Incl. Lifetime Replacement Guarantee
- Contains 30; 5 Watt High Intensity Cree Leds
- 12000 Lumens
- 150 Watts
- 30 Degree Spot Beam
- IP67 Waterproof Rating
- Handy Rear-Facing Illumination
- 23040 Lumens
- 288 Watts
- 8 Degree Spot / 90 Degree Flood Combo Pattern
- Easy 100 Percent Bolt-On Installation
- IP67 Waterproof Design
- Durable Die-Cast Aluminum Housing
- Includes Snap-On Cover And Premium Wiring Harness
- 20 in. Light Bar Chrome
- Flood/Spot
- 120W Total
- 10100 Lumens
- 21.5 in. x 3.25 in. x 3 in.
- 4800 Lumens
- 60 Watts
- Contains 12-5 Watt High Intensity Cree Leds
- Contains 15 Cool White Daytime Running Leds
- 30 Degree Spot Beam
- Black Panel Design
- Durable Die Cast Aluminum Housing
- Moisture Breather Reduces Moisture Build-Up Behind The Lends
- Includes Premium Flat-Wound Wiring Harness With On/Off Switch
- Includes Snap-On Cover
- Features Both End Mounts And Adj. Base For Multiple Solutions
- 30in Single Row LED
- 10in Slimline LEDs
- Winches Sold Separately
- 8-10 Hours
- Featuring Cree 5 Watt LED Chips
- 6063 Extruded Alum. Housing w/Custom Oversized Heat Sinks
- Lexan Polycarbonate Front Cover
- Zamak End Plates And Mounts
- 50 000 Plus Hours Life Span
- IP Rated At 68
- Instant On/Off Operation
- Gore Pressure Equalizing Vent
- ZERO UV Emissions
- Amperage Required Much Less Than Compared To HID Lights
- PWM Thermal Management Regulation
- Simple Plug-In Installation
- Incl. A Flat 4-pin Connector
- Offers Running Lights; Brake Lights; Turn Signals; And Reverse
- Attaches To Vehicle w/3m Automotive-grade Adhesive Pads
- Designed To Fit Perfectly In Between Tailgate And Bumper
- Universal Fit - Fits Most Makes And Models
- Ip68 Waterproof Rating
- 156 Leds Per Row -624 Leds Total
- Length: 60 In
- 3 Year Warranty
- 8 Back Lighting Options: Red / Green / Blue / Light Blue / Purple/ Amber / White Or Demo Mode
- Back Lighting Independently Controlled Using Switch Logic
- Fits All RDS-Series Light Covers And Mounts
- Black Exposed Printed Circuit Board
- 10 Year Warranty
- 9-15 V DC
- Black Powder Coat Finish
- Pressure Equalizing Vent
- IP68 Compliant - Dust/Water Ingress
- High Grade Aluminum Alloy Housing And Heat Sink
- Over/Under Voltage Protection
- High Impact Polycarbonate Lens
- 8 Back Lighting Options: Red / Green / Blue / Light Blue / Purple / Amber / White Or Demo Mode
- Back Lighting Independently Controlled Using Switch Logic
- Fits All E-Series Light Covers And Mounts
- Black Exposed Printed Circuit Board
- 10 Year Warranty
- 9-15 V DC
- Black Powder Coat Finish
- Pressure Equalizing Vent
- IP68 Compliant - Dust/Water Ingress
- High Grade Aluminum Alloy Housing And Heat Sink
- Over/Under Voltage Protection
- High Impact Polycarbonate Lens
- Same Construction As RIGIDs SR-Series
- Fits All SR-Series Light Covers And Mounts
- Black Exposed Printed Circuit Board
- Backlighting Options Red/Green/Blue/Light Blue/Purple/Amber/White
- 10 Year Warranty
- 9-15 V DC
- Harness And Switch Sold Separately / Part Number 40200
- Back Lighting Independently Controlled Using Switch Logic
- Black Powder Coat Finish
- Pressure Equalizing Vent
- IP68 Compliant - Dust/Water Ingress
- High Grade Aluminum Alloy Housing And Heat Sink
- 50000 Plus Hour Lifespan
- 9-36 V DC
- Durable UV Resistant Powder Coat
- High-Grade Aluminum Alloy
- Integrated Thermal Management System
- Impact Resistant Polycarbonate Lens
- Over/Under Voltage Protection
- RFI/EMI Protection
- Reverse Polarity Protection
- RoHS Compliant
- IP68 Compliant - Dust/Water Ingress
- SAE J575 Compliant - Shock/Vibration
- Black Exposed Printed Circuit Board
- 50000 Plus Hr LED Lifespan
- Instant On/Off - No Warm Up
- RoHS Compliant
- Over / Under Voltage Protection
- Extruded Aluminum Housing
- Durable Polycarbonate Lens
- Integrated Thermal Management
- GORE Pressure Equalizing Vent
- Designed Engineered Assembled In The USA
- Up To 50 Degree Horizontal Spread
- IP68 Compliant - Dust/Water Ingress
- High Grade Aluminum Alloy Housing And Heatsink
- Two-Stage- Textured Black Powder Coat
- Light Weight- Durable Nylon Bezel
- Max-Bright Auxiliary Lighting Trim Ring
- Independently Controlled White Or Amber Auxiliary Lighting
- Efficient Current Draw For Systems With Limited Power And UTVs
- Broad Spot Optical System
- Compatible With Original E-Series Mounting Dimensions
- Corrosion Resistant Chrome Hardware
- Harness And Switch Sold Separately
- Limited Lifetime Warranty
- Complete LED Light Kit
- Stainless Steel Construction
- Comes With A 10 Inch Revolve Light Bar With Independently Controlled Amber Backlighting
- Designed To Fit On The 2017-ON Can-Am Maverick X3
- 1440 Lumens
- 18 Watts [total]
- Each Light Contains 6; 3 Watt Cree Leds
- 90 Degree Flood Beam/li>
- Black Panel Design
- IP67 Waterproof Rating
- Durable Die Cast Aluminum Housing
- Moisture Breather Technology
- Reduces Moisture Build-up Behind The Lens
- Incl. Premium; Flat-wound Wiring Harness w/On/off Switch
- 3 Year Warranty
- Sold In Pairs
- 8000 Lumens
- 100 Watts
- Flood Beam
- 3 Year Warranty
- Sold In Pairs
- 80 Watts
- 9600 Lumens
- Ip67/Ip69K Waterproof Rating
- Spot/Flood Beam Pattern
- Tinted Indirect Reflector Design
- Diecast Aluminum Housing
- Impact And UV Resistant Lens
- Sleek Bezel-Less Design
- Wiring Harness And On/Off Switch Included
- Sold In Pairs
- Includes Snap-On Cover
- 3-Year Warranty
- Provides Added Front End Protection
- Aggressive Styling Compliments Todays Larger Grilles
- Unique Plate Design Provides Maximum Support To Outer Wings
- Heavy Duty 1 5/8 in. Outer Steel Tubing
- Heavy Duty 2 1/4 in. Wide Upright Rubber Strips
- Removable Center Mesh Panel - Sold Separately
- Accepts 26 in. Drl Led Light Kit- Sold Separately
- Removable Mesh Panel Accommodates Factory Sensors
- Pre-Drilled Provisions For Factory Sensors
- Exterior Step Plate Provides Easy Access To Engine Compartment
- Die Stamped Steel Step Area For Maximum Traction
- 50000 Plus Hour Lifespan
- 9-36 V DC
- Durable UV Resistant Powder Coat
- High-Grade Aluminum Alloy
- Integrated Thermal Management System
- Impact Resistant Polycarbonate Lens
- Over/Under Voltage Protection
- RFI/EMI Protection
- Reverse Polarity Protection
- RoHS Compliant
- IP68 Compliant - Dust/Water Ingress
- SAE J575 Compliant - Shock/Vibration
- 50000 Plus Hour Lifespan
- 9-36 V DC
- Durable UV Resistant Powder Coat
- High-Grade Aluminum Alloy
- Integrated Thermal Management System
- Impact Resistant Polycarbonate Lens
- Over/Under Voltage Protection
- RFI/EMI Protection
- Reverse Polarity Protection
- RoHS Compliant
- IP68 Compliant - Dust/Water Ingress
- SAE J575 Compliant - Shock/Vibration
- Xtreme LED Light Bar